VITURE Mobile Dock Mini

The Mobile Dock Mini turns your Switch, Switch 2, or other USB-C handheld into a docked, big-screen setup you can take anywhere. It splits into two modules — an Adapter and a 10,000mAh Battery — that snap together (Hug Mode) for full docked play with charging while playing, or separate (Solo Mode) when you'd rather travel light and supply your own power.

Hug Mode: Adapter + Battery combined, riding on the back of your console — built-in power for playing anywhere. Solo Mode: Adapter only, connected to your own USB-C PD charger — lighter and more compact when power's nearby.

Yes, either detached or combined, it works as a 10,000mAh USB-C power bank for your phone or other USB-C devices.

Yes — it supports side-by-side 3D at up to 3840×1200@60Hz, and 2D at up to 1920×1200@120Hz, for movies and games with all VITURE XR glasses.

Yes. Plug a charger into the Charge Port and keep playing — the battery tops up without interrupting your session, so a low battery never cuts you off.

It's purpose-built for Switch & Switch 2 — since these consoles need external power to output video, the dock's battery powers them automatically once connected. It also works with USB-C handheld consoles such as Steam Deck and ROG Ally, iPhone 15 and later (excluding iPhone 16e and iPhone Air) and most compatible phones with DP output, and USB-C laptops and desktops with DisplayPort over USB-C — for these devices, pass-through charging is optional since they don't rely on the dock's power to display video.

The Mini is a detachable two-module design (Hug/Solo Mode) built for solo, on-the-go handheld play — smaller and lighter (249g vs. 359g for the Pro Mobile Dock and 361g for the One Mobile Dock), with a smaller 10,000mAh battery (vs. 13,000mAh on both) but higher-power USB-C output (27W vs. 20W on both) and higher-res video passthrough (up to 3840×1200@60Hz (3D), 1920×1200@120Hz (2D), vs. up to 3840×1080@60Hz on the Pro Mobile Dock and up to 1920×1080@60Hz on the One Mobile Dock). Both the Pro Mobile Dock and One Mobile Dock are fixed one-piece units with HDMI input, built more for multi-device or docked-at-home setups.

No — the Magnetic Mount is optional. If you want the dock to ride along as one handheld unit, use the alignment guide in the box to stick it onto the back of your Switch or Switch 2 — it's thin and stays in place, so you can still slide your console into its official dock for TV play without peeling it off. Then attach the Mobile Dock Mini to the Magnetic Mount. If you'd rather skip it, you can still connect the Mobile Dock Mini with the included cable and use it without mounting it to your console.